9 / 24
NOTICE! This weather station can be operated with up to 3 remote sensors. Each remote
sensor being connected must be operated on a different channel. If only one remote sensor
is connected, it should be operated on channel 1.
12. Replace the cover and retighten it with the screw.
8 Manual time setting
1. Press and hold MODE button for approx. 3 seconds to change to time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press MODE button to confirm and continue to the next setting.
5. Settings order: Year > Month > Day > Weekday Language > 12/24-hours mode > Time zone offset
> > Hours > Minutes
6. Finally press the MODE button to save the settings and exit the setting mode.
9 Time zone setting
To set a different time zone, proceed as follows:
1. Press and hold MODE button for approx. 3 seconds to change to time setting mode.
2. Press the MODE button multiple times until the display shows the time offset 00 Hr.
3. Press UP or DOWN button to select the desired time deviation in hours (-23 up to +23 hours).
4. Finally press the MODE button to save the settings and exit the setting mode.
10 Alarm setting
1. Press the MODE button to switch to the settings mode for the alarm time. "AL" is displayed instead
of the seconds.
2. Press the UP button to enable or disable the alarm. When the alarm is enabled, the symbol ap-
pears on the display.
3. Press the MODE button for about 3 seconds to enter the settings mode for the alarm time. The
first value to be set flashes.
4. Press UP or DOWN button to change the value.
5. Press the MODE button to confirm and switch to the next setting.
6. Settings sequence: Hours > Minutes > Snooze Interval (01-20 minutes)
7. Finally, press the MODE button to save the settings and exit settings mode.
8. When the alarm sounds, press any button to stop the alarm.
11 Snooze function
1. When the alarm sounds press the SNOOZE/LIGHT touch sensor at the top of the device or the
SNOOZE/LIGHT button on the back to activate the snooze function. The alarm will sound again in
5 minutes.
2. Press any other button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.
4. The default interval of 5 minutes for the snooze function can be changed in the alarm setting
mode.
