Bresser 7000016000000, Инструкция по эксплуатации

Страница: 10 / 28

10 / 28
8 Automatic time setting
After the power has been restored, the unit automatically
searches for the radio signal. It takes approximately 3-8
minutes for this process to be completed.
If the radio signal is correctly received, the date and time
are set automatically and the reception symbol is displayed.
If no radio signal has been received, proceed as follows:
1. Press the RCC button for approx. 2 seconds to initiate
the reception of the radio signal again.
2. If still no radio signal is received, the time must be set
manually.
3. To deactivate automatic reception of the time, press
and hold the RCC key for approx. 3 seconds.
9 Manual time adjustment
1. In normal display mode, press the SET button for about
3 seconds to enter the time settings mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the SET button to confirm and switch to the next
setting.
5. Sequence of the settings: Time offset > Hours >
Minutes > Year > Month > Day
6. Finally, press the SET button to save the settings and
exit settings mode.
NOTICE! For more information on the time display in
12- or 24-hour mode, see the chapter "Changing the dis-
play".