Bresser 40-25880, Инструкция по эксплуатации, Страница: 19 / 24

- 19 -
DE
GB
2. Press the function button (POWER button) (Fig. 2, 5) to turn the device on.
3. When you now look into the eyepiece (Fig. 2, 1) the function symbols appear in the lens coverage
(Fig. 3).
4. The rangefinder has two modes that can be selected in sequence after turning on by pressing
the Mode button (Fig. 2, 4). The mode in use is shown at the bottom of the function display.
5. Long press the Mode button (Fig. 2, 4) to change the shown value from yard to metre (M).
6. Then aim the central circle at the object.
7. To make a measurement press the function button (POWER) (Fig. 2, 5) one time briefly. The
distance or speed of the object will be shown at the function display.
8. Press and hold the MODE and POWER button simultaneously until “SE” appears. Then you
can adjust the required brightness of the crosshair by pressing the MODE button (for -) and the
POWER button (for +) several times. The input is saved by pressing the MODE + POWER button
again until “AF” or “SP” appears.
9. If you press and hold the POWER button for more than 5 seconds you will activate the “continu-
ous measurement” mode. Deactivate this mode by pressing the POWER button once.
10. The power would be switched off automatically after approx. 30 seconds if the distance-measur-
ing instrument is not used.