23
DE
EN
Quick Start
• Move the latches and open the front cover
• Load 8 lithium AA or alkaline AA batteries
• Insert the SD card
• Switch to the
SETUP
Mode
• Press
MENU
key
• Press
UP
key to select
Camera
or
Video
Mode
• Put it in the right position you would like
• Switch to the
ON
Mode and the camera has started
working
Notes Before Use
1. When setting camera parameters, please put camera
in Setup mode.
2. Do not set the camera directly from
ON
to
Setup
.
3.
To replace the battery, SD card, fi rstly turn camera to
OFF
mode.
4. The color changing of the Indicator
1) When camera is updating, indicator light fl ashes
green.
2) The indicator light fl ashes red when it is turned on
or ready for operation.
3) When battery is lower, the indicator light turns
blue.
4) When being set to long standby time, the indicator
fl ashes purple.
5. Batteries need to be used dry batteries, please do
not use rechargeable batteries
6. When the SD card is inserted into camera, make sure
that the SD card is not in the unprotected position
7. When using an external power supply, make sure that
the voltage is correct.
8. Please take out the battery for long time unused, to
avoid leakage of the battery.
9. This camera can be not used under water or can be
not placed in an environment of strong Acid and
alkali
10.
Please do not touch the lenses with your fi ngers.
11. Keep the lens and battery compartment clean.
12. Do not use sharp or hard objects to attack or scratch
the screen.
Manual_3310007_Observation-camera-DL-30MP_de-en_BRESSER_v102020a.indb 23
Manual_3310007_Observation-camera-DL-30MP_de-en_BRESSER_v102020a.indb 23
09.11.2020 14:17:57
09.11.2020 14:17:57
