Bresser 33-40000, Инструкция по эксплуатации, Страница: 10 / 32

10
2. Important Safety Instructions!
• The working voltage of the camera is 6V. The camera
is supplied with 2 x 4 AA type batteries.
• Please install batteries according to polarity
displayed.
• For camera operation an SD-card* (8 MB to 32 GB) is
necessary.
• Please unlock the write-protection function before
inserting the SD-card.
• Please insert the SD-card before testing the camera
and ensure the power switch is at the OFF position.
The camera has no internal memory for saving images
or videos.
• Do not insert or remove the SD-card* or SIM-card*
when the power switch is at the ON position.
• When first in use it is recommended to format the SD-
card via the camera.
• The camera automatically changes to USB mode
when connected to the USB port of a computer. In
this case, the SD-card* functions as an exchangeable
memory device.
• In the TEST mode the camera shuts down automatically
after 3 minutes if not in use. In this situation it´s
necessary to switch the power back on in order to
*not included with your purchase
continue working with the remote control.
• The red filter in front of the lens moves automatically
when needed. It might seem to have no real function
the way it hangs halfway over the lens. However, this
is not a camera defect as long as the image quality
remains unaffected.
3. Basic Operations
3.1 Power supply
2x4 AA type batteries* are necessary for power supply
for the camera.
Optionally, the device may be powered through an
external power supply (extra accessory).
This manual only describes use with battery power
supply.
ATTENTION!
The manufacturer does not take liability for any damage
caused by the wrong insertion of batteries or by the use
of a non-compatible power supply!
Open the bottom cover.