Bresser 2010400, Инструкция по эксплуатации, Страница: 22 / 48

www.bresser.de
22
Print Control Menu
While printing is in progress, press the Knob while on the Printing...
Screen to display the Print Control Menu.
- Info Screen: Returns to the Printing... Screen.
- Tune: Displays the Tune Menu.Pause Print: Pauses the print and
displays an alternate Print Control Menu, which allows you to
resume the print and change the filament.
- Resume Print: Resumes the paused print.
- Saving Print and Off: Saves the state of the print, so you can
turn the printer off. The next time the printer is powered on, it will
display the Power Loss Recovery Menu.
- Auto Feed Filament: Performs the Loading Filament function.
- Auto Retract Filament: Preforms the Unloading Filament
function. This allows you to change the filament in the middle of
a print.
- Stop Print: Cancels the print in progress without saving its state.
Tune Menu
While printing is in progress, you can access the Tune Menu to make adjustments.
- Main: Returns to the Main Menu.
- Speed: Displays the Adjust Print Speed Screen, which allows
you to change the printing speed on the fly.
- Nozzle: Displays the Adjust Temperature Screen, which allows
you to change the Nozzle temperature on the fly.
- Fan Speed: Displays the Adjust Fan Speed Screen, which allows
you to adjust the cooling fan speed on the fly.
- Flow: Displays the Adjust Flow Screen, which allows you change the speed at
which filament is extruded on the fly. Note that reducing the speed too much can
cause clogs in the Nozzle.
- Z Offset Setting: Displays the Z Offset Setting Screen, which allows you to adjust
the Z offset on the fly.