7
Cleaning Your Juice Extractor:
WARNING:
Always unplug the product and allow it to cool before cleaning
or storing it.
NEVER SUBMERGE THE BASE IN WATER OR ANY OTHER LIQUID
NOTICE
: The Pusher, Chute, Pulp Guard, Pulp Container, Strainer/Blades,
and Receptacle can be washed in dishwasher or under running water
.
1.
Always unplug the product from the electrical outlet when it is not in
use or will be left unattended and before cleaning.
2.
The Pusher, Chute, Pulp Guard, Pulp Container, Strainer/Blades, and
Receptacle can be washed using a nonabrasive sponge and soapy warm
water. If the pulp has dried in pulp container or strainer let it soak in
water for approximately 10 minutes before cleaning.
NOTE: Some plastic parts might stain when it comes in contact
3.
Dry all parts thoroughly before reassembling your Power Juicer.
4.
Motor base can be cleaned with a damp cloth. Dry and store.
Troubleshooting:
Problem:
Possible Solution:
Juice Extractor will not work in the
“I” position
*Safety Locking Bar was not
positioned properly.
*Turn the appliance off and unplug
the unit. Ensure all parts were
assembled correctly.
*Make sure all parts were cleaned
correctly and thoroughly.
Motor makes a loud noise and unit
vibrates
*Turn off and unplug the appliance.
Ensure all parts were assembled
correctly.
*Juicing overripe fruits may produce
excessive pulp and clog the filter.
Motor stalls when juicing / Pulp build
on Stainless Steel Strainer
If pulp starts building under the lid,
slow down the juicing process. Turn
off and unplug appliance, clean the
strainer thoroughly.
Reduced Juice extraction/Juice leaks
between Rim of Juicer and Cover
Try a slower juicing action when
using the Pusher.
