brennenstuhl SOL 800 DE 3495, Инструкция по применению, Страница: 7 / 64

Directions for use
Solar LED-Spot SOL 800 DE 3495
Thank you for choosing our product. Before you use the product for the first time, you
need to familiarize yourself with the following operating instructions and safety warnings.
Only use the device as described and only for the areas of use that are indicated.
Keep these instructions. If the device is given to someone else, make sure these
instructions go with it.
PARTS LIST
0 1 Bracket
0 2 Connecting cable light
solar module
0 3 Mounting screws
for solar module (4x)
0 4 Solar module
0 5 Main unit
0 6 LED-unit
0 7a Main unit holder
0 7b Main unit mounting screws
0 7c Clip
0 8 Motion detector
0 9 AUTO / OFF switch
10 Control- light duration
INITIALLY CHARGING THE SOLAR POWERED LIGHT
Before you put the solar light into operation, it will need to be charged.
You have two options:
Charging via the Solar Module:
Connect the solar module (4) cable (2) with the main unit (5).
The ON / OFF switch (9) on the main unit must be set to OFF. Put the solar module in a
location where it will get maximum exposure to direct sunlight. Refer to the notes on
suitable installation locations in the following section.
Depending on time of year, weather and the location of the solar module, it may take up
to 4 days before the light is charged and ready to use.
3
6
4
10
1
2
7a
AUTO OFF
9
TIME
2
8
5
7c
7b
7
013417 Solar LED-Strahler SOL 800.qxp_013417 BA_Solar LED-Strahler SOL 800 19.03.18 10:20 Seite 7