11
Solar LED outdoor lamp SOL 14
1. First, disassemble the lighting unit.
2. Set the switch to OFF-position.
3. Remove both of the screws from the battery cover on the back of the main unit.
4. Pull out the battery cartridge.
5. Remove the old batteries from the battery cartridge and replace them with three new
rechargeable AA Ni-MH 1.2 V batteries. Make sure that you connect the +/- poles
correctly.
WARNING: Inserting the batteries in the wrong direction can damage the unit.
6. Screw the battery cover back on.
7. Mount your solar light back in its original location.
8.Repeat the steps in the section „PRIOR TO THE FIRST USE OF YOUR SOLAR LIGHT“, to
make sure that your new batteries get completely charged.
GENERAL SAFETY TIPS
1. Do not use any other solar module than the one provided. Using another solar module
can cause injuries or damage to the light and termination of the warranty.
2. Lay the cable such that it is secured and cannot create any kind of hazard (e.g. hazard
of tripping). Discontinue use of the solar light if the cable is damaged or defective.
MAINTENANCE TIPS
Keep the motion detector free of dust and deposits by occasionally cleaning it with a dry
cloth or wiping it off with warm, soapy water. Also, make sure that the solar module is
always free of dirt and deposits. A dirty solar cell cannot completely charge the battery.
This can cause premature aging in the battery and lead to unreliable function in the de-
vice.
STORAGE
If you want to store your light indoors for more than one or two days, the switch must be
set in the OFF-position, in order to prevent damage to the batteries. To preserve optimal
performance, we recommend that you do not store your solar light for long periods with
the batteries still inside.
1
2
3
3 x Ni-MH rechargeable batteries
Battery cartridge
Battery cover
015109 Solar-Aussenleuchte SOL 14:015109 Solar-Aussenleuchte SOL 14 Bed.-Anl. 08.06.2009 22:03 Uhr Seite 11