10
EN
Wireless flush-mount actuator with switch wiring 868.3 MHz
Wireless flush-mount actuator with switch wiring 868.3 MHz
List of pictograms used
Please read the instructions for use!
Caution! Fire hazard!
Observe the warnings and safety instructions!
Dispose of the packaging and device in an
environmentally friendly manner!
Caution! Danger of electric shock!
Safety instructions
The instructions for use are a part of this product.
They contain important information about safety,
use and disposal. Before using this device, please
familiarise yourself with all instructions for use and safety
instructions. Only use the device as described and for the
indicated purpose. Be sure to include all documentation when
passing this device on to others.
WARNING!
DANGER TO LIFE AND RISK OF
ACCIDENTS FOR INFANTS AND CHILDREN!
Never leave
children alone and unsupervised with the packaging material.
It poses a risk of suffocation as children may swallow or inhale
small parts or plastic film. Children frequently underestimate
the dangers. Always keep children away from the device. It is
not a toy.
This device may be used by children aged 8 years and up, as
well as by persons with reduced physical, sensory or mental
capacities, or lacking experience and/or knowledge, so long as
they are supervised or instructed in the safe use of the device
and understand the associated risks. Do not allow children to
play with the device. Cleaning and user maintenance must not
be performed by children without supervision.
Only operate this device in a dry, dust-free environment.
Only operate this device indoors.
Do not expose the device to adverse conditions, such as
• moisture,
• continuous sunlight,
• heat radiation,
• cold,
• vibrations.
CAUTION! RISK OF INJURY!
We assume no liability for property damage or personal injury
due to improper use or failure to observe the safety instructions!
This will void the warranty / guarantee!
Any use not specified in these instructions for use will damage
the device. Do not modify the device. Otherwise safe operation
is not guaranteed.
DANGER OF ELECTRIC SHOCK!
Do not open the housing. This device has no parts which require
maintenance. In the event of a malfunction, please contact Service.
Work on the mains must be performed by an electrician whilst
de-energised.
If you do not have any expertise in this area, do not perform
the installation of the product yourself. Commission a trained
electrician.
Do not use the device if it is visibly damaged.
FIRE HAZARD!
Installation of the product may only be carried out by a qualified
professional (e.g. an electrician), who is familiar with the relevant
specifications (e.g. VDE).
Do not connect any terminal devices to the device which could
cause a fire or other damage when switched on unattended
(e.g. iron).
Do not switch the device uncontrolled or whilst unattended.
Do not overload the device.
Overloads may result in fire hazards or product damage. The
maximum load is approx. 400 W.
Intended use
The wireless flush-mount actuator with switch wiring is solely intended
to switch consumers connected to the wireless actuator on and off in
dry indoor locations.
