brennenstuhl 1294550, Инструкция по эксплуатации

Страница: 11 / 35

EN 11
Wireless remote control 868.3 MHz Wireless remote control 868.3 MHz
WARNING! CHEMICAL BURNS!
Keep batteries away from children.
The remote control contains a lithium button cell battery. If a new or
drained button cell is swallowed or enters the body it can lead to
severe internal chemical burns and can cause death within two hours
of ingestion. Always ensure that the battery compartment is securely
shut. If the battery compartment does not close correctly, stop using
the device, remove the battery and keep it away from children.
If you believe that a button cell has been swallowed or has
entered someone's body, seek immediate medical attention.
The batteries must be disposed of correctly, even if they have
been kept away from children.
Even used batteries can cause injuries.
Intended use
The purpose of the wireless remote control is solely the control of
BrematicPRO wireless components in dry indoor spaces.
Information about Wireless Operation
This product uses the 868.3 MHz proprietary wireless protocol.
Wireless transmission is implemented using a non-exclusive channel,
interference can therefore not be excluded.
The range in building may vary greatly from open areas. In addition to
the transmission power and the reception characteristics of the receivers,
ambient conditions, e.g. humidity in addition to the structural conditions
on site, are important factors.
The range can be significantly reduced in part due to:
• wood, gypsum, concrete, reinforced concrete walls
• proximity to metal and conductive objects
• broadband interference, e.g. in residential areas (DECT phones,
mobiles, wireless headphones, wireless speakers, wireless
weather stations, baby monitors)
• proximity to electric motors, transformers, mains adapters,
computers
Duty Cycle
Duty cycle refers to a transmission time limit regulated by law for
devices transmitting in the 868 MHz range. It is intended to ensure
smooth operation of devices operating in the 868 MHz range. The
maximum transmission time of each device is 1 % of an hour
(corresponding to 36 seconds/hour). Once the 1 % limit has been
reached it cannot transmit until the time limit of the duty cycle has
ended, so after one hour.
Included in delivery
1 x Wireless remote control
1 x 3V button cell battery CR2450
1 x Quick start guide
1 x Instructions for use (digital, available for download)
Technical data
Product designation: FB 868 01 5TA 3726
Item no.: 1294550
Radio frequency: 868.3 MHz
Frequency: 868.1 - 868.5 MH
Max. transmitting power: < 20 mW
Duty cycle:
< 1 % per h
Supply voltage: 1 x 3 V button cell CR2450
Battery life span: approx. 2.5 years
Power consumption: 30 mA max.
Ambient temperature: 0 °C to 35 °C
Protection type: IP20
Open area range: approx. 100 m
Dimensions (W x H x D): 107.2 x 44.9 x 11.8 mm
Weight:
33.2 g
Subject to technical changes without notice.
Device overview
Front Back
Device LED
Button pair A
Button pair B
Button pair C
Button pair D
Button pair E
Battery
compartment
Function
The wireless remote control is part of the Brennenstuhl Home
Automation System BrematicPRO, controlled via app or the
BrematicPRO PC software.