Bremshey Sport RW3, Руководство пользователя

Страница: 22 / 25

2. Press the RECOVERY button again to go back to the main menu.
Metric system ~ Imperial system
For speed and distance, metric units or imperial units can be used as default units of
measurement.
1. Locate the KM/ML switch on the rear of the console.
2. Move the KM/ML switch to “KM” to use the metric system as the default system
of measurement.
3. Move the KM/ML switch to “ML” to use the imperial system as the default system
of measurement.
4. Remove the batteries from the rear of the console. Refer to the section
“Replacing the batteries”.
5. Insert the batteries into the console to apply the changes.
Celsius (°C) ~ Fahrenheit (°F)
For temperature, Celsius (°C) or Fahrenheit (°F) can be used as default units of
measurement.
1. Locate the C/F switch on the rear of the console.
2. Move the C/F switch to “C” to use Celsius (°C) as the default system of
measurement.
3. Move the C/F switch to “F” to use Fahrenheit (°F) as the default system of
measurement.
4. Remove the batteries from the rear of the console. Refer to the section
“Replacing the batteries”.
5. Insert the batteries into the console to apply the changes.
Cleaning and maintenance
The equipment does not require special maintenance. The equipment does not
require recalibration when it is assembled, used and serviced according to the
instructions.
WARNING
– Do not use solvents to clean the equipment.
▪ Clean the equipment with a soft, absorbent cloth after each use.
EN
22 RW3