Bremax WEB02 I, Руководство пользователя

Страница: 20 / 24

Problems Solutions
It displays
when running
software.
No RC is
found! Please
check the USB
cable connection!
1. Check if the connection between and the computer via
USB cable is correct.
2. Make sure that the battery installment is correct.
3. extension
4. Replace the batteries with new ones.
WEB02
Ⅱ
Remove USB cable or USB hub. Use USB cable directly
for connection.
During learning, it
displays Failed to
learn.
1. During learning, be sure to place your original RC and
head-to-head and keep their distance within 5-20cm.
2. Make sure that the original RC can be used properly to control the
device.
3. Ensure that the batteries in the original RC work normally.
WEB02
Ⅱ
During learning, RC
picture on the
interface will
disappear during
the process of
learning.
1. Check if the connection between and the computer via
USB cable is correct.
WEB02
Ⅱ
extension 2. Remove USB cable or USB hub. Use USB cable directly
for connection.
After learning,
can not
control home
devices.
WEB02
Ⅱ
1. Make sure the devices are on standby mode.
2. Make certain that the distance between and desired device
is within 8 meters and try to aim it at the device.
3. Ensure that there is no obstacle between and desired
device.
4. Restart learning for those buttons failed to operate properly.
5. Replace the batteries with new ones.
WEB02
WEB02
Ⅱ
Ⅱ
l
FAQs
2 Finish Step 1.5 and 1.6 within 6 seconds after clicking on
button. If not, please try again.
3 In case of any disconnection between and the computer
during the operation, please connect the cable again and run
.
）
） Ⅱ
Ⅱ
Start to
learn
WEB02
WEB02 .exe
17
English