Statement
All the items and attached figures above are
only used for the description of usage of this
product. Any law responsibility will not be
undertaken by BREMAX Technology Co.,
Ltd. (Hangzhou).
Cautions On Use
1. Please operate in the right sections to control
corresponding devices. For example, press buttons on
DVD section to control DVD.
2. Make sure that the distance between URC and desired
device is within 8 meters and angle within 30 degrees.
Ensure that there is no obstacle between them.
3.
Do not expose the URC to the humid environment, to the
place with too high or too low temperature.
4. Do not use USB cable not provided by BREMAX.
5.
Do not disassemble the URC during daily maintenance
without prior endorsement by BREMAX. Do not press by
force or drop it. Do not use organic detergents like acetone
to wipe dirt off.
Specification
Interface
Power
Requirements
Power life
Distance
Dimension
Mass
Usage
Environment
1.5m USB cable
3 AAA Batteries
Over 3 months under standard usage conditions
Approximately 8 meters (26 feet)
212
55
20 mm
105g (not including batteries)
NOTE
: Some parameters above may have some slight changes
according to specific models of
NRC series internet powered
URCs.
product to be exchanged for malfunction within one month
and be free from defect in materials and workmanship for a
period of one year from the date of original purchase (as
evidenced by the relevant purchase receipt).
Within one year from the date of purchase, you can contact
franchiser of BREMAX for claiming if the product has some
problem in quality.
l
Service Center
For any help please contact our service center via:
Hot line: 4008
878585 086
0571
88872183
086
0571
88872187
Service Time: 8:00
£-
21:00 Monday to Friday
10:00
£-
18:00 Saturday and Sunday
FAX:
0571
88216187
Website: http://www.bremax.com
BREMAX URC
can not control
home devices.
1. Make sure the devices are on standby mode.
2.
Make certain that the distance between URC and desired
device is within 8 meters and try to aim it at the device.
3.
Ensure that there is no obstacle between URC and desired
device.
4. Restart learning for those buttons failed to operate properly.
5. Replace the batteries with new ones.
.10.
.11.
Temperature: -25 to +55
Relative humidity: 0% to 93%
During learning,
RC picture on
the interface will
disappear during
the process of
learning.
1. Check if the connection between URC and the computer via
USB cable is correct.
2.
Remove USB extension cable or USB hub. Use USB
cable directly for connection.
Customer Service
l
Warranty
BREMAX Technology Co., Ltd. (Hangzhou) warrants this
