Page 1
BREL motors is part of:
Manual Brel 24mm electronic DC radio motor single shaft
Type MJE24S
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which there can be no claim on the warranty.
warning:
Children cannot recognize the dangers of electrical equipment and may therefore not work with it.
It is important to follow this instruction for your own safety.
1. Do not operate the motor in humid environments.
2. The motor must be installed correctly.
3. Keep the antenna in a good condition and do not shorten. The antenna should not come into contact with other metal parts
otherwise it will reduce the power.
4. The motor must be protected from direct moisture influences.
______________________________________________________________________________
(mode en time have only one function
at a transmitter with a timer: DC458 en DC 920)
Up
P2
Mode
P1
Channel - stop
C
Time
Down
If you are using a multi-channel transmitter, you cannot program on the shared channel.
______________________________________________________________________________
Technical data of the motor
Type MJE24S
•
Motor Voltage:
DC 12V
•
Maximum ampère charger:
1.0 A
•
Power:
6.8 Watt
•
Torque:
0.6 Nm
•
Speed:
34 rpm
•
Ampèrage:
0.57 A
•
Moisture and dust:
IP40
•
Storage capacity is up to 20 channels
•
Working temperature of the motor:
o
Normal use:
-10
℃
tot +40
℃
o
Heavy use:
-20
℃
tot +70
℃
