Page 2
______________________________________________________________________________
Installing the motor
Motor Cone
Wall bracket
Headrail
Motorbracket
VB/PB/Roman
Bottomrail
______________________________________________________________________________
Step 1 Setting up the first channel
The pairing of the first transmitter can be done in two ways:
1x
Option A
2x P2
1x
1x
2x
The motor moves 1x.
The direction is right.
If the direction is wrong,
go to step 2.
Put tension on the motor by a transformer
Press 2x P2. The motor moves Press the button up.
or by connecting a battery.
and release. at each press
The motor moves momentarily.
momentarily.
1x
Option B
2x P2
1x
1x
2x
The motor moves 1x.
The direction is right.
If the direction is wrong,
go to step 2.
Press P1 1x and release when
Press 2x P2 The motor moves
Press the button up.
the motor moves momentarily.
and release.
at each press
.
momentarily.
With the above action, all the channels in memory and the final adjustment is deleted.
You can also repeat this procedure to reset the motor.
______________________________________________________________________________
Step 2 Change direction
If the direction is good , skip step 2 and proceed to step 3.
Option A
5 sec.2x P2
1x
The direction of rotation
should be right.
.
Put tension on the motor by a transformer
Press 2x P2. The motor moves Press the button up.
or by connecting a battery.
and release.
at each press
The motor moves momentarily.
momentarily.
