Page 4
______________________________________________________________________________
Option A Delete transmitter
Deleting the transmitter can be done in three ways:
1.
When setting up the first channel also the limit setup will be removed.
2.
Press P1 button until the LED flashes 3x and blinked 1x.
3.
1x P2
1x STOP 1x P2
OK
Press P2 button 1x. Press stop button. Press P2 button 1x.
_______________________________________________________________________________
Option B Teaching multiple transmitters
(Maximum of 20 transmitters per receiver)
2x P2
1x P2
Press P2 button 2x
Press P2 button 1x
Programming the new
of the existing transmitter
A
.
of the new transmitter
transmitter is ready.
or channel
B.
To delete one channel , you must repeat the above operation.
_______________________________________________________________________________
Optie C
Eindposities verwijderen en nieuwe laten inleren.
1x P2
1x CLOSE 1x P2
OK
Press 1x P2.
Press 1x close button.
Press 1x P2.
LED flashes 5x for confirmation.
Then let the curtain open and close. This person then looks for the new final positions himself.
