____________________________________________________
Pairing the remote control transmitter in the memory of the motor
METHOD 1 1x P2-A- 1x
1x P2-A- 1x
1x P2-A- 2x
Go to the existing Press 1x
P2-A
of Press 1x
P2
of Go to the new channel
b
.
Press
P2-A
channel
a
. the existing channel
a
. the existing channel
a
. of the additional channel
b
.
The product makes
The product makes The product makes 2x up-down
1x up-down movement 1x up-down movement movement and/or beeps 3x
and/or beeps 1x.
and/or beeps 1x.
for confirmation.
To delete a channel you have to repeat the above.
-----------------------------------------------------------------------------------------------------------------------------------------------------
METHOD 2
1x P2-A- 1x
1x P2-A- 1x
1x STOP-A- 2x
Go to the existing Press 1x
P2-A
of Press 1x
P2-A
of Go to the new channel
b
.
Press
channel
a
.
the existing channel
a
. the existing channel
a
.
STOP-A
button of the additional
The product makes
The product makes channel
b
.The product makes
1x up-down movement 1x up-down movement 2x up-down movement and/or
and/or beeps 1x.
and/or beeps 1x. beeps 3x for confirmation.
To delete a channel you have to repeat the above.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Adding a replacement handtransmitter, in case of loss/failure of the old hand transmitter
After power has been applied to the motor, press stop within 10 seconds.
METHOD 3
P1 until 1x
Hold STOP A until
2x
Press and hold P1 until the
Hold down stop A until the motor moves
motor 's moving back and forth.
back and forth 2x and/or beeps 3 times.
____________________________________________________
Set up number of channels
In programming mode; press the up or down button. You can stop quickly.
If you want to change the locked channels, you can repeat above.
