Page 7
External Switch Mode
Pushbutton switch mode (Factory default)
Switch mode
switched
successfully.
Single button pushbutton switch mode
Check both upper and lower limits are set, the motor is power-on (1 jog), within 10S.
Mechanical switch mode
Check both upper and lower limits are set, the motor is power-on (1 jog), within 10S.
Electronic switch mode
Check both upper and lower limits are set, the motor is power-on (1 jog), within 10S.
Press P1 button for
10 seconds
LED blinks
3x
Releas the
button
Press P2
4x
P2
Press P1 button for
2 seconds
LED blinks
5x
Switch mode
switched
successfully.
Press P1 button for
10 seconds
LED blinks
3x
Releas the
button
Press P2
3x
P2
Press P1 button for
2 seconds
LED blinks
5x
Switch mode
switched
successfully.
Press P1 button for
10 seconds
LED blinks
3x
Releas the
button
Press P2
2x
P2
Press P1 button for
2 seconds
LED blinks
5x
Switch mode
switched
successfully.
Press P1 button for
10 seconds
LED blinks
3x
Releas the
button
Press P2
1x
P2
Press P1 button for
2 seconds
LED blinks
5x
LED blinks
1x
LED blinks
2x
LED blinks
3x
LED blinks
4x
Press
P2
. The product
moves 1x up and down
Press 1x
down.
Press 1x
down.
The motor speed
has been reduced.
1x P2
Speed Control
P2
1x
1x
1x
1x
The motor speed
has been increased
Press 1x
up
.
Press 1x up.
If the motor does NOT react after this action, it is already at the highest or lowest speed.
Option C
There are 3 different speeds.
If the speed has been changed the slow stop is activated. To deactive the slow
stop you have to reset the motor.
