Breitling EXOSPACE B55, Руководство пользователя

Страница: 28 / 42

53 52
b) Use
Thereafter use is identical to the chronograph:
• Start by pressing P1 (the upper screen displays
CD RUN
or
CU RUN
)
• Stop by pressing P1 (the upper screen displays
CD SToP
or
CU SToP
).
Restart possible by pressing P1.
• A long press on P2 will reset to the original settings (
RESET
).
In
CD RUN
mode, the watch emits a beep every second during the 10 seconds before
time 0. An alarm that can be switched off (by pressing a pushpiece or on the crown)
then sounds at time 0 for 10 seconds, while the timekeeping continues; the upper
screen momentarily displays
CD
ž
0
, and then
CU RUN
.
If the countup (
CU RUN
) remains on for more than 99 days, 23 hours, 59 minutes and
59 seconds, the counter stops and the upper screen displays
CU oVF
.
14. COUNTUP ALARM (
ALCU
)
This function makes it possible to generate an alarm synchronized with the abso-
lute time of the countup. This is a unique or “mission” alarm.
a) Setting (
SETALCU
)
• Select the
ALCU
function by turning the crown.
13. COUNTDOwN COUNTUP CLOCK (
CDCUCLK
)
The
CDCUCLK
(CountDown CountUp ClocK) function or MET (Mission Elapsed Time)
is used for more or less long term missions, or regattas, for example. It offers two
possibilities:
• Engage a countdown directly (with a duration that can be configured) and
timing:
C-DoWN
function.
• Conduct “absolute timing” with a zero or non-zero value start (by adding an
“offset”):
C-UP
function.
a) Setting (
SETCDCU
)
• Select the
CDCUCLK
function by turning the crown.
• Pull the crown into position 2 (the upper screen will show
SETCDCU
)
• By turning the crown, select countdown (
C-DoWN
) or countup (
C-UP
)
• Confirm by pressing P2.
• Adjust the number of days (
DAy
), hours (
HoUR
), minutes (
MINUTE
) and seconds
(
SECoND
) of the countdown or countup by turning the crown, and confirming it
each time by pressing P2.
• For the countdown, adjust the type of alarm signal desired (
ALARM SIGNAL
dis-
play):
BUZZER
(sound alarm),
VIBRATE
(vibrating, silent alarm) or
BoTH
(both
together) by turning the crown and confirming by pressing P2.
• Push the crown into neutral position 1.