Netherlands, Israel, Spain, Korea
BreezeVIEW PC
An updated version of BreezeVIEW PC is released, which will work on version 4 or 5 of SNMPc. In
this release support has been added for SNMP variables that were added in the BreezeNET PRO.11
product family. This version also supports BreezeNET PRO products.
SNMPc version 5 (workgroup edition) operates on Windows 98/NT only. To purchase SNMPc and for
more information on this platform please refer to
www.castlerock.com
.
BreezeNET PRO.11 (AP -10 SA-10/40 WB-10) Release 4.4 Details
Firmware
= 4.41
MIB
= 2.6a
Authentication, Power Save and Country Standard Support
See details above
DL Model
The power level in a DL unit is set to Low Power, and cannot be changed to High Power. The power
level is not reset by Set Factory Default at any level. This model is targeted for ETSI-compliant
installations using high gain antennas.
The catalog numbers are as follows:
811150P - AP-10DL PRO.11
811151P - SA-10DL PRO.11
811152P - SA-40DL PRO.11
811153P - WB-10DL PRO.11
VLAN Support
There is now support for VLAN (802.1Q). The support for VLAN is transparent support, that is VLAN
traffic will be transferred over BreezeNET equipment without interference but will not actively take
part in this protocol.
MIB
There is now a new version to the BreezeCOM MIB. There are new instances for the setting and
configuration of Power Save mode and Authentication.
To upgrade to version 4.4 , the upgrade package, is obtainable from Technical Support area on the
BreezeCOM web site.
SA-PCR PRO.11 Release 4.4 Details
SA-PCR C/S
= H2
