CARING FOR YOUR ZENTRO FIRE PIT INSERT (STEEL UNITS ONLY):
Be sure to burn a hot fire in your fire pit within 24-48 hours of having your fire pit outside. This will help to cure the paint on the top
and outside of the fire pit.
This product can reach potential temperatures of 1,900+ degrees Fahrenheit. At this point, there is no paint that can withstand both
direct flame contact and outdoor use. We paint our fire pits with a High-Temp outdoor grill paint that has a heating rating up to 1,400
degrees Fahrenheit. However, with use and time, the fire pit will begin to develop surface rust in some areas. For this reason, we build
our fire pits very heavy duty so they will last for years and years, despite the rust. You can maintain the painted black look of your fire
pit by sanding down any spots you would like to paint and then using a can of black high-temperature paint to touch-up the spots.
CARING FOR YOUR ZENTRO FIRE PIT INSERT (STAINLESS STEEL UNITS ONLY):
The Zentro Stainless Steel units are built out of a high quality 304 stainless steel, which should never rust, allowing you leave your
fire pit out in the elements all year long! This material will naturally develop a beautiful patina finish over time and requires no
maintenance.
FOR YOUR SAFETY:
The Zentro Fire Pit Insert is designed for outdoor use only.
Never burn your Zentro Fire Pit Insert in a building, garage, or any
enclosed area.
Always use your Zentro Fire Pit Insert on a level, non-combustible surface such as concrete, rock or stone.
Do not use on wooden
or composite decks.
Do not attempt to move or store your Zentro Fire Pit Insert until all ashes and coals are completely extinguished and all surfaces
have cooled completely.
Never touch ashes or coals to see if they are hot.
All surfaces of the Zentro Fire Pit Insert will become extremely hot when in use.
To avoid burns, do not touch any part of the Double
Flame Fire Pit until it has completely cooled unless you are using protective gear (potholders, gloves, BBQ mittens, hot pads, etc.).
When using your Zentro Fire Pit Insert, exercise the same precautions you would with any open fire.
Never leave your Zentro Fire
Pit Insert unattended, especially around children and pets.
INSTALL IN 3 EASY STEPS:
1. Ensure that you have the correct size block fire surround for
your new Zentro Fire Pit insert (see table to right).
2. Ensure that the depth of your block fire surround is at least 15
inches; this will provide 3 inches of air space underneath the fire
pit insert for air flow.
Ensure that nothing is touching the bottom
or the sides of your Zentro Fire Pit Insert as this will affect airflow
and interfere with the smoke reduction technology.
Remove
any debris or ashes from the inside of the block fire surround if
necessary.
3. Using 2-3 people, set the fire pit into the block fire surround.
The Zentro Fire Pit Insert has 1/8” spacer brackets welded to the
underside of the top flange. Your Zentro Fire Pit Insert is positioned
correctly when these spacer brackets are resting on the top layer
of the block fire surround.
ZENTRO SIZE: BLOCK SURROUND NEEDED:
ZENTRO 24”
ZENTRO 32”
ZENTRO 28”
27” - 33” INSIDE DIAMETER
31” - 37” INSIDE DIAMETER
35” - 41” INSIDE DIAMETER
Содержание ZENTRO
Страница 1: ...ZENTRO FIRE PIT INSERT USER GUIDE...
