
Volledige bedieningshandleiding A
© Bredenoord bv 2016
7
4
Installation VLM
Place the light tower on a flat surface, it should not tilt more than 10°. Check if the surface is strong enough.
Tilt and/or turn the lights in the desired position and tighten the lights with the lever (1).
Pull the blocking pin (2) loose to twist the light tower. Turn the light tower in the desired position. Lock the
tower again with the blocking pin (2).
Pull the pin (3) up and pull the stabilizer till pen (3) falls into it's corresponding hole.
Drop the stabilizer by turning the lever (4) and level the Light tower horizontal
Ground the Light Tower with the earth stud on the outside of the housing.