2022 R1
Place the work surface on top of the framework. Use the provided wood
screws to connect the top to the supports. There are pilot holes to help with
the process. Make sure the work surface is
1”
apart from the wall.
8
1” Required
from wall.
No.10, 0.75in
Wood Screw
X8
9
Ensure wires and wire management is complete. Install the front
fascia with flip down door on to the wall mounted assemby by
using the mortise brackets on the side gables. Lift up, in and
down to engage.
10
Close the top flip door. It will be supported with a pre-installed
magnetic latch.
Page 3 of 3
BRC GROUP • www.brc.group • [email protected] • 877.260.4309
1”
Move the lifting columns to the highest
point for the final step. Slide in the top
laminate cover with grommets into the
assembly. The top laminate cover sits
on top of the upper lifting column
brackets, no fasteners are required.
11
Step 1
Step 2
