1
Prepare the wall panel by connecting
the lifting column brackets with the
hardware included. Connect all four
brackets using the pre-drilled holes
in the back panel.
1
Preparing The Lifting Columns
Lifting column is pre-installed with M6 x 10 bolt.
Insert lifting column into the keyway on the
framework then lock in place from the side
by attaching with M6 screw .
2
Install cantilever support with screw and
star washer to framework.
1
Adjust the framework to the
distance between the lifting column brackets.
Slide the assembled lifting columns and framework in to the
assembled lifting column brackets on the back panel.
| Mesa Standard Wall Mount Electric HA Table
Installation Guide
2022 R1
Wall Mount Height Adjustable Mesa Assembly
This guide assumes that the wall mounting surface is level and plumb. Mounting into wood wall studs or concrete is recommended. For metal wall studs or otherwise,
sufficient support must be added to accommodate heavy loads. Contact your BRC representative for weight limit requirements and recommendations.
Preparing The Wall Panel
2
Connect the lifting columns
to the bottom bracket using
screws and star washers.
x
Flat Washer 1/4" ID 9/16" OD
X10
Hex Head Screw, 5/16"-18
X10
Flat Head Screw, M6x12
X4
Flat Head Screw, M6x12
X4
Socket Head Screw, M6x16
X8
Star Washer, M6
X8
Installation Guide
Page 1 of 3
BRC GROUP • www.brc.group • [email protected] • 877.260.4309
D Nut Inserts, 5/16"-18 x 5/8"
X8
Lifting Column Brackets
