BRAYER BR4916, Инструкция по эксплуатации

Страница: 6 / 36

6 EN
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
• Use the humidifier at the room temperature from
+10° С to +40°С and
• relative humidity less than 80%.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains.
USING THE ULTRASONIC HUMIDIFIER
• Remove the nozzle (1) and the decorative lid (2),
remove the water tank (3) from the unit body (12)
(pic. 1).
• Turn over the water tank (3), turn the lid (6)
counterclockwise and remove it (Pic. 2).
• Fill the water tank (3) with the required amount of
water.
• Notes: — if the tap water used is hard, use water
cleaned with household filters or mix tap water with
distilled water in proportion 1:1.
• Install the lid (6) on the water inlet (5) and thread it
turning clockwise.
• Install the tank (3) filled with water on the unit body
(12), install the decorative lid (2) and the nozzle (1).
• Wait till the process chamber (13) is filled with water.
• If you want to use the aromatization function, remove
the container (11). Add some drops of water-soluble
aromatic oil and install the container (11) back to its
place (Pic. 3).
• Notes:
- use water-soluble aromatic oils only
- if you are not going to use the aromatization
function, remove the container (11), wash it with
water, dry and install back to its place
• Insert the power plug into the socket.
• Switch the Ultrasonic humidifier on by turning the
knob (9) clockwise, the indicator will light up green.
• Set the mist release intensity by turning the knob (9).
• To turn the illumination on press the button (7), to
switch the illumination off press the button (7) again.
• If the water tank (3) is empty, the indicator will light
up red.
• Switch the Ultrasonic humidifier off by turning the
knob (9) counterclockwise and unplug the unit.
• Fill the tank (3) with water, install it to its place and
switch the unit on.