BRAYER BR4902, Инструкция по эксплуатации, Страница: 10 / 48

10 EN
Night mode
• To turn the night mode on, press and hold the
«Speed» button (12) on the control / indication panel
(2) for 3 seconds or press and hold the «Speed»
button (22) on the remote control (25) for 3 seconds.
• In night mode, the air purifier will turn on at low speed
« » and all symbols will go out.
• To turn the night mode off - press any button on the
control / indication panel (2) or press any button on
the remote control (25).
Air purifier switch off timer
• By consequently pressing the button (13) «Timer»
on the control/indication panel (2) or the button (24)
«Timer» on the remote control (25), set the timer
operation time, the operation time is displayed by the
digits (16).
• Timer setting time is from 1 to 24 hours.
• To turn the timer off, press and hold the «Timer»
button (13) on the control / indication panel (2) for 3
seconds or press and hold the «Timer» button (24)
on the remote control (5) and the digital symbols of
timer operation time(16) will be reset.
Ionization mode
• To switch the ionization mode on, press the «
Ionization» button (19) on the control/indication
panel (2) or press the «Ionization» button (21) on the
remote control (25) and the symbol (14) « » will
light up.
• To switch the ionization mode off, press the
«Ionization» button (19) on the control/indication
panel (2) or press the «Ionization» button (21) on the
remote control (25) and the symbol (14) « » will
go out.
Resetting the filter operation time
• If the symbol (17) « » is displayed, you will
heat a long beep sound and the air purifier will be
switched off, this means that the filters (8, 9, 10) need to
be cleaned or replaced.
ATTENTION!
Before removing the lid (1), make sure
that the power plug is not inserted into the mains
socket.
• Remove the cover (1) (fig. 3) and take out the prefilter
(8).
• Using a household vacuum cleaner with an
appropriate attachment, carefully vacuum the outer
surface of the prefilter (8), if there is dust on the
charcoal filter (9) and the HEPA filter (10), vacuum them
too.
• Insert filters (10, 9, 8) into the air purifier body (fig. 5).
• Install the lid (1) back to its place (fig. 6).
• Turn on the air purifier, press and hold the «Ionization»
button (19) on the control / indication panel (2) for 3
seconds or press and hold the «RESET» button (23) on
the remote control (25) for 3 seconds and the symbol
(18) « » will go out.