BRAYER BR3007, Инструкция по эксплуатации

Страница: 7 / 28

7 EN
RECYCLING
To prevent possible damage to the environment
or harm to the health of people by uncontrolled
waste disposal, after expiration of the service
life of the unit or the batteries (if included), do
not discard them with usual household waste,
take the unit and the batteries to specialized
stations for further recycling.
The waste generated during the disposal of products is
subject to mandatory collection and consequent disposal in
the prescribed manner.
For further information about recycling of this product apply
to a local municipal administration, a household waste
disposal service or to the shop where you purchased this
product.
• Press the grid (6) on both sides and take it off. Clean
the air inlet grid (6) with a brush. Install the grid (6)
back to its place until locks clicking.
• Do not immerse the unit into water or any other
liquids.
• Do not use abrasives and solvents to clean the
nozzle (3) and the unit body (4).
STORAGE
• Disconnect the unit from the mains and clean it.
• Never wind the power cord around the hairdryer body
(4), as it can lead to its damage or damage of the unit
body (4).
• A hanging loop (7) you can hang the hairdryer on is
provided for the ease of storage of the unit, given that
no water will get on it; and you can fold the handle (6)
to minimize the hairdryer size.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
DELIVERY SET
1. Hairdryer — 1 pc.
2. Nozzle — 1 pc.
3. Manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Supply voltage: 220-240 V, ~ 50/60 Hz
• Rated input power: 2200 W
ATTENTION!
Do not use the unit near water in the
bathrooms, showers, swimming pools etc.
The manufacturer reserves the right to change the
design, structure and specifi-cations not affecting general
operation principles of the unit, without prior notice.
The unit operating life is 3 years
The manufacturing date is specified in the serial number.
In case of any malfunctions, it is necessary to apply promptly
to the authorized service center.