BRAYER BR3006, Инструкция по эксплуатации

Страница: 5 / 28

5 EN
• Clean the unit regularly.
• Unplug the unit after usage and before cleaning.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION!
Do not allow children to play with polyethylene bags
or packaging film. Danger of suffocation!
• The hairdryer is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the operating surface,
unit body, power cord or power plug during operation
of the unit.
• •Close supervision is necessary when children or
disabled persons are near the operating unit.
• During the unit’s operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• Regularly check the integrity of the power cord.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or by
similar qualified personnel, to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself; in case of any
malfunction or if the unit is dropped, unplug it and
apply to the service center.
• To avoid damages, transport the unit in original
package only.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to
the specifications of your mains. When the unit is
powered from 60 Hz frequency mains, no additional
actions are necessary.