BRAYER BR3005, Инструкция по эксплуатации

Страница: 6 / 32

6 EN
• Make sure that the indicated specifications of the
power supply of the hairdryer correspond to the
specifications of your mains. When connecting the
hairdryer to the mains with 60 Hz frequency, the unit
does not need any additional measures.
• Wipe the hairdryer body (5) and the nozzle (4) with a
clean, slightly damp cloth and then wipe them dry.
USING THE HAIRDRYER
Before connecting the power plug to the mains
make sure that the operating voltage of the
hairdryer corresponds to the voltage of your mains.
• Insert the power plug into the mains socket.
• Set the required air flow speed with the switch (1):
- « » — the hairdryer is off;
- «I» — low air flow speed;
- «II» — high air flow speed.
• Set the required air flow temperature with the switch
(2):
- «I» — low temperature;
- «II» — medium temperature;
- «III» — maximal temperature.
HAIR DRYING
• Set the switch (2) to the medium «II» or maximal
«III» position and select the required air flow speed
with the switch (1).
• During the operation hold the hairdryer by the handle
(7).
• Move the hairdryer above your hair and remove
excessive moisture from your hair with your hand or
a comb.
• Note: during the first operation a foreign smell and a
small amount of smoke can appear from the heating
element, this is normal and it is not covered by
warranty.
NOZZLE ATTACHMENT (4)
• Use the nozzle (4) when you need to concentrate
drying on a small area, for example, a separate hair
lock, or when you need to straighten wavy hair.
• Attach the nozzle (4) to the hairdryer body (5).
• Insert the power plug into the mains socket. Set the
required air flow speed mode with the switch (1) and
the required air flow temperature with the switch (2).
COOL SHOT
• Use the «cool shot» function for fixing your hairstyle.
• When the desired effect is achieved, press and
hold the «cool shot» button (3) « » and fix your
hairstyle.
• After finishing operation, switch the hairdryer off by
setting the switch (1) to the position « », and unplug
it.