BRAYER BR3004, Инструкция по эксплуатации

Страница: 7 / 32

7 EN
• If the hairdryer is switched off during operation, unplug
the unit and make sure that the air inlets and outlets
are unblocked.
• Let the hair dryer cool down for 10-15 minutes, then
turn it on again. Do not block the air holes while using
the hair dryer and do not allow dust, lint or hair to enter
the air intake grille (8).
CLEANING AND MAINTENANCE
The hairdryer is intended for household use only.
• Switch the hairdryer off by setting the switch (1) to
the position «0», unplug it and wait until the hairdryer
cools down.
• Wipe the hairdryer body (7) and the attachment with a
slightly damp cloth and then wipe them dry.
• Clean the air inlet grid (8) with a brush.
• Do not immerse the unit into water or any other liquids.
• Do not use abrasives and solvents to clean the
hairdryer body (7) and the attachment.
STORAGE
• Disconnect the hairdryer from the mains and clean it.
• Do not wind the power cord around the hairdryer body
as it may damage the power cord or the hairdryer
body.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
• Periodically straighten the power cord if it gets
twisted during operation.
• After you finish using the hairdryer unplug the unit.
DIFFUSER (5)
• The diffuser (5) is used for different hairstyles. You
can add volume at the hair roots or throughout the
hair length, create romantic curls and waves etc. with
the diffuser (5).
• Attach the diffuser (5) to the hairdryer body.
• Switch the hairdryer on and set the required
operating mode.
• After you finish using the hairdryer, unplug the unit.
COMB NOZZLE (6)
• With the Professional Comb Nozzle you can style
your hair and make it smooth. This nozzle allows you
to dry your hair without a hairbrush.
• Attach the Comb Nozzle (6) onto the Hairdryer.
• Switch the hairdryer on and set the required
operating mode.
• After you finish using the hairdryer, turn off the
hairdryer with the operating mode switch button and
then unplug the unit.
OVERHEATING PROTECTION
• The overheating protection system switches the
hairdryer off if the outgoing air temperature is above
the limit.