BRAYER BR1803, Инструкция по эксплуатации

Страница: 8 / 40

8 EN
to zero, the display (3) will show the tare symbol (11)
«TARE»;
- touch the buttons (6) «CHOL» or (7) «KCAL» to select
the number of the product in the figures (2), in our
example it is number «1» «FLOUR», the number of the
product «1» will be shown on the display (3) with digital
symbols (12);
- add the desired amount of flour to the container,
the digital symbols (13) will display the weight of the
product;
- after weighing the product, the digital symbols (13) will
display the nutritional value of the product «KCAL» and
the cholesterol content «CHOL»;
- digital indications of calories «KCAL» and cholesterol
«CHOL» will be shown three times, alternately on the
display (3), after 60 seconds the scales will switch off
(pic. 3).
- to determine the nutritional value and the amount of
cholesterol, you can also select the product number in
the figures (2) after weighing the product by pressing
the buttons (6) «CHOL» or (7) «KCAL», the digital
symbols (13) will show the energy value of the product
«KCAL» and the cholesterol content «CHOL» (pic. 4).
Adding the same product
- suppose you weigh 500 g of some product, determine
its nutritional value «KCAL» and the amount of
cholesterol, and then add another 100 g of this product,
the scale will show the total weight of the product (600
g), its nutritional value «KCAL» and the amount of
cholesterol «CHOL».
- the digital indications of calories «KCAL» and
cholesterol «CHOL» will be shown three times,
alternately on the display (3), after 60 seconds the
scales will switch off.
Consecutive weighing of products and calculation
of nutritional value and cholesterol content for each
product
- Touch the buttons (6) «CHOL» or (7) «KCAL» to
select the product number in the figures (2), the digital
symbols (12) will show the product number on the
display (3). After weighing the digital symbols (13) will
show the nutritional value of the product «KCAL» and
the cholesterol content «CHOL»;
- touch the «OFF/TARE» button (4) to set the weight
of the previous product to zero and the display (3) will
show the tare symbol (11) «TARE»;
- add the next product and select its number by touching
the buttons (6) «CHOL» or (7) «KCAL», the nutritional
value and the amount of cholesterol will be displayed by
digital symbols (13);
- adding products is possible up to the maximum
weighing limit of the scale of 5 kg.
- if you want to check the last calculated data, touch
the measurement unit selection button (5) «UNIT», the