BRAYER BR1503, Инструкция по эксплуатации

Страница: 8 / 60

8 EN
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically,
sensory, psychically or mentally disabled persons
(including children) or by persons lacking experience
or knowledge if they are not under supervision of a
person who is responsible for their safety or if they
are not instructed by this person on the usage of the
unit.
• Before using the kitchen machine, check the power
cord integrity. If the power cord is damaged, it should
be replaced by the manufacturer, a maintenance
service or similar qualified personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains. When the unit is used in
the mains with 60 Hz frequency, it does not need any
additional settings.
• Wash the attachments (12, 13, 14), the lid (8), the
bowl (7) with warm water and a neutral detergent,
rinse and dry.
• Wash the Blender Bowl (17), Blender Bowl Cover
(16), and Measuring Cup (15).
• Also wash the meat grinder parts (20-27).
• Wipe the motor unit (2) and the base (5) with a soft,
slightly damp cloth, then wipe dry.