BRAYER BR1245, Инструкция по эксплуатации, Страница: 4 / 19

6 7 EN EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional settings.
• Before using the unit, wash the lid (6) and the bottle
(7) with warm water and a neutral detergent, then
rinse and dry.
• Wash only the lower part of the blender attachment
(1), clean the outer surface with a slightly damp cloth.
Never immerse the blender attachment (1) into water
or any other liquids completely.
• Wash the knife block (5) (only from the knives side)
with warm water and neutral detergent, rinse and dry.
• The cutting edges of the knife block (5) are sharp and
can be dangerous, handle the knife block (5) carefully.
• Clean the motor unit (2) body with a soft, slightly damp
cloth, and then wipe it dry.
• Do not immerse the blender attachment (1), the motor
unit (2), the knife block (5), the power cord and the
power plug into water or any other liquids.
USING THE BLENDER ATTACHMENT
Continuous operation time should not exceed 30
seconds while using the blender attachment (1). Make
at least a 3 minutes break between the operation
cycles.
• Before installing the blender attachment (1), make
sure that the power plug is not inserted into the mains
socket.
• Insert the blender attachment (1) into the motor unit (2),
and turn it counterclockwise as far as it will go, make
sure that the attachment is fixed properly (pic. 1).
• Insert the power plug into the mains socket.
• Immerse the blender attachment (1) into the bowl with
products that you want to chop/mix.
ATTENTION! Hold the motor unit (2) with the blender
attachment (1) vertically while processing the food.
• Press and hold down the button (4) to switch on, use
this operating mode for mixing liquid products.
• When you press and hold down the button (3)
«TURBO», the blender will switch on at the maximal
rotation speed. Use this mode to process liquid and
hard products.
Notes:
– products should be put into a suitable bowl before the
blender is switched on. The amount of products to be
processed should not exceed 2/3 of the capacity of the
bowl in which they are processed.
– before chopping and mixing peel the fruit or
vegetables, remove inedible parts, such as stones, and
cut the fruit or vegetables into 15x15x15 mm cubes. Put
them into a bowl and add some juice or water.
– do not chop or mix frozen food.
ATTENTION!
When chopping hard vegetables, for example, carrots
— cut the carrot into small 15x15x15 mm pieces and
put them into a suitable bowl. The maximal weight of the
carrot should not exceed 250 g. Add 350 ml of water.
•
Release the button (3 or 4) to switch the blender off.
• After you finish the unit operation, take the power
plug out of the mains socket and remove the blender
attachment (1), turning it clockwise.
ATTENTION!
– Do not remove the blender attachment (1) during the
unit operation.
– To avoid damaging the knives of the blender
attachment (1) do not process very hard products, such
as cereals, rice, coffee beans, hard cheese, frozen food
etc.
– If the foodstuffs are hard to chop with the blender
attachment (1), add some water, juice, liquor etc.
COOKING FOOD IN THE BOTTLE (7)
Continuous operation time should not exceed 30
seconds while using the bottle attachment (7). Make
at least a 3 minutes break between the operation
cycles.
Use the bottle (7) attachment for making fruit and berry
or vegetable mixes containing enough juice.
ATTENTION! Do not process very hard products, such
as nutmegs, coffee beans, cereals, frozen food or ice.
Notes:
– before chopping and mixing peel the fruit or
vegetables, remove inedible parts, such as stones, and
cut the fruit or vegetables into 15x15x15 mm cubes. Put
them into the bottle (7) and add some juice or water.
– do not chop or mix frozen food.
Before installing the motor unit (2), make sure
that the power plug is not inserted into the mains
socket.