BRAYER BR1122, Инструкция по эксплуатации

Страница: 9 / 40

9 EN
• Put the flask (1) on the tray (10).
• Switch on the Coffee Maker by setting the Knob
(13) to ”ВКЛ/ВЫК, press the Knob (13) - the Light
Indicator (14) will turn red.
• Switch the Coffee Maker off by pressing the Knob
(13) again.
• Wait 15-20 minutes and switch the coffee maker on.
Wait until there is no descaling agent in the water
tank (7).
• Switch the coffee maker off and pour the liquid out of
the flask (1).
• After descaling, wash the coffee maker thoroughly. To
do this, pour pure water into the tank (7) and switch
the unit on without adding ground coffee in the filter
(5).
• Repeat the washing cycle several times.
Note: - to remove the scale you can use special
descaling agents for coffee makers and coffee
machines, strictly following the instructions on their
usage.
CLEANING AND CARE
• Always switch the coffee maker off and unplug it
before cleaning.
• Let the coffee maker cool down completely and clean
the outer surfaces of the unit body (9) with a soft,
slightly damp cloth, then wipe dry.
• Use soft detergents to remove dirt; do not use metal
brushes, abrasive detergents and solvents.
symbols ”13:00” will appear on the Display (15), and
after a while the Display (15) will show the current
time.
Notes:
- while in the delayed start mode the time
configuration functionality is not available.
- to exit the Program Mode set the Knob (13) to
”ТАЙМЕР”, and press the Knob (13) once
- to change the switch on time repeat the coffee
maker switch on time setting steps described
above.
• The coffee maker will switch on at the preset time
and the indicator (18) will light up.
• If you don’t switch the coffee maker after making
coffee by pressing the on/off button (19) «ВКЛ/
ВЫКЛ», it will switch off in 40 minutes.
DESCALING
• Clean the coffee maker from scale regularly.
• You can use «homemade descaling agent» - citric
acid solution in proportion 100 portions of water per 3
portions of citric acid.
• Open the lid (6), fill the water tank (7) with the
descaling agent up to the maximal mark on the water
level scale (8).
• Make sure that the filter holder (4) and the filter (5)
are installed to their places and there is no ground
coffee in the filter (5).