BRAYER BR1045BN, Инструкция по эксплуатации

Страница: 5 / 44

5 EN
• Do not switch the kettle on without water, after the
kettle is filled, close the lid tightly.
• Ensure that the water level is not above the maximal
mark «MAX». If the water level exceeds the maximal
mark, boiling water can splash out of the kettle during
boiling.
• To avoid burns by hot steam, do not bend over the
kettle spout.
• Do not open the kettle lid while water boiling.
• The surface of the kettle may have rather high
temperature. Be cautious and careful when in contact
with heated surfaces of the kettle. Take the kettle by
the handle.
• Be careful while carrying the kettle filled with boiling
water. Be careful when you pour water out of the
kettle, do not tilt the kettle sharply, in case of careless
use of the kettle, you can get burns by hot water.
• Unplug the kettle before cleaning or when you are
not using it. When unplugging the kettle hold only
the power cord plug and carefully remove it from the
mains socket, do not pull the power cord — this can
lead to damage of the power cord or the socket or
cause short circuit.
• To avoid electric shock do not immerse the electric
kettle into water or any other liquids.
• Do not wash the electric kettle in a dishwashing
machine.
• For children safety reasons do not leave polyethylene
bags, used as a packaging, unattended.
ATTENTION!
Do not allow children to play with polyethylene bags
or packaging film. Danger of suffocation!
• The electric kettle is not intended for usage by
children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the unit and the power
cord during the electric kettle operation.
• Place the unit out of reach of children during the
operation and cooling down.
• This unit is not intended for usage by physically or
mentally disabled persons (including children) or
• by persons lacking experience or knowledge if
they are not under supervision of a person who
is responsible for their safety or if they are not
instructed by this person on the usage of the unit.
• Check the integrity of the power cord, the power plug
and the kettle body periodically.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after it was dropped, unplug the unit
and apply to the service center.
• Transport the kettle in the original package.