SERIES 762 BIDIRECTIONAL SLURRY KNIFE GATE VALVES
Installation, Operation, and Maintenance Manual
8 of 30
© 2021 BRAY INTERNATIONAL, INC. ALL RIGHTS RESERVED. BRAY.COM The Information
contained herein shall not be copied, transferred, conveyed, or displayed in any manner that would
violate its proprietary nature without the express written permission of Bray International, Inc.
5.0
HAZARD-FREE USE
NOTICE
Failure to follow these procedures could affect product warranty.
5.1
This device left the factory in proper condition to be safely
installed and operated in a hazard-free manner. The notes and
warnings in this document must be observed by the user if this
safe condition is to be maintained and hazard-free operation of
the device assured.
5.2
Take all necessary precautions to prevent damage to the valve
due to rough handling, impact, or improper storage. Do not use
abrasive compounds to clean the valve, or scrape metal surfaces
with any objects.
5.3
The control systems in which the valve is installed must have
proper safeguards — to prevent injury to personnel, or damage to
equipment — should failure of system components occur.
5.4
The upper limits of permitted pressure and temperature
(depending on the housing and liner materials) must be
observed. These limits are shown on the valve identification tag.
5.5
The valve must not be operated until the following documents
have been observed:
> Declaration on EU Directives
> IOM Manual (supplied with the product).
