10
Control pushbutton & Status-LED
7KHFRQWUROSXVKEXWWRQDOORZVWKHXVHUWRVZLWFKEHWZHHQWZRORDGHGVHWXSSUR¿OHVÄDI³DQGÄDI³7RVZLWFKEHWZHHQWKH
VHWXSVWKHEXWWRQPXVWEHSUHVVHGDQGKHOGIRUVHFRQG6ZLWFKLQJLVLQGLFDWHGE\DVLQJXODUUHGÀDVKRIWKH6WDWXV/('
3UHVVLQJWKHEXWWRQIRUVHFRQGVFRPSOHWHO\HUDVHVWKHLQWHUQDOPHPRU\7KLVLVLQGLFDWHGE\DFRQVWDQWÀDVKLQJRIWKH
Status-LED.
Attention: After erasing the setups from memory the NOX4 DSP will not reproduce any audio output.
3OHDVHQRWH7KH12;'63LVGHOLYHUHGLQIDFWRU\PRGHZLWKWZRLGHQWLFDOVHWXS¿OHVZKLFKGLIIHURQO\LQWKHLUH[WHQVLRQV
The Status-LED indicates the current active DSP-setup. Green means that setup 1 (af1) is loaded, orange means
WKDW VHWXS DI LV ORDGHG$ ÀDVKLQJ UHG OLJKW FRXOG LQGLFDWH WKH IROORZLQJ PRGHV 7KH LQWHUQDO PHPRU\ LV HPSW\
2. A connection to a computer is established 3. An upload via a MicroSD card is in progress
11 Signal
inputs
7KHDPSOL¿HUKDV5&$FRQQHFWRUVIRU5&$FDEOHVWKDWFDQEHFRQQHFWHGZLWKWKHSUHDPSOL¿HURXWSXWVRIDKHDGXQLWRU
SUHDPSOL¿HU7KHFRQQHFWRUVDUHJROGSODWHGWRHQVXUHDEHWWHUVLJQDOWUDQVPLVVLRQ
3OHDVHQRWHWKDWEULGJHGFKDQQHOVPXVWEHFRQ¿JXUHGLGHQWLFDOO\LQWKHFKDQQHOURXWLQJPDWUL[DQGDVZHOOLQWKH(4VHF
-
tion. The appropriate signal input must be routed to both output channels (channel „A & B“ or „C & D“). We recommend to
OLQNWKHEULGJHGFKDQQHOVGXULQJWKHFRQ¿JXUDWLRQLQRXU3&7RROVRIWZDUH
12 Control
Input
This multifunctional input is used to connect DSP accessories, like a level remote control or a bluetooth module.
13 Optical
Input
Optical input in SPDIF format for connection to signal sources with a digital audio output. The sampling rate of this input
must be between 6 and 192 kHz. The input signal is automatically adjusted to the internal sampling rate.
14
Signal outputs channel E and F
7KHVHSUHDPSOL¿HURXWSXWVDUHXVHGWRFRQQHFWDQRWKHUDPSOL¿HU7KHVLJQDORXWSXWVFDQEHIUHHO\FRQ¿JXUHGLQWKH'63
via the PC-Tool software as at the internal channels. The output voltage is max. 6 Volts RMS.
25
