Bravo Bravo Tamper, Быстрый старт

Страница: 10 / 12

10
Disassembling the Bravo tamper
With the help of a coin, remove the screw cap located on the top of
the
Bravo Tamper , by turning it anticlockwise. Once the screw cap
has been removed, hold the base firmly, and using an (2.5mm) Allen
wrench loose the internal Allen bolt to take apart the handle and the
upper spring. After that, using one of your hands, hold the axis and
unscrew it until the base and the lower spring come loose. Done!
Assembling the Bravo Tamper
Place the lower spring onto the thinner end of the axis. After that, insert
the axis through the aligning base, press the axis and screw it into the
base of the tamper. Place the upper spring onto the other end of the axis,
and after that, press the handle and the wash against the base. Using an
(2.5mm) Allen wrench screw the Allen bolt onto the end of the axis that
is now inside the upper part of the handle. Finally, place the screw cap
back in.