background image

 
If you answer a phone call over the BRAVEN speaker when connected to the speaker via the 3.5mm cable 
(line-in), you will be able to hear the caller through the BRAVEN speaker, but the caller will hear you 
through the microphone on your phone instead of through the microphone on the BRAVEN speaker. The 
3.5mm “auxiliary” port is designed to send the left and right audio channel signals to the BRAVEN 
Speaker, but not the microphone signal. When connected to your BRAVEN speaker via Bluetooth, both the 
left and right audio signals and the microphone signal are transferred to the BRAVEN speaker.  
 
If you have daisy-chained multiple speakers together and you receive a call, you will hear the call audio 
on all speakers that are in the daisy-chain; however, the microphone will only function on the device that 
you are paired to wirelessly (the first speaker in the chain).  
 

My BRAVEN speaker isn’t charging my cell phone when I plug it into the 
BRAVEN’s USB port 

 

1.

 

Make sure that the 3.5mm cable is not plugged into the BRAVEN speaker or into your playing 
device. 

2.

 

Make sure that the BRAVEN speaker is adequately charged.  We recommend fully charging your 
BRAVEN before using it to charge external devices. 

3.

 

Turn off the BRAVEN speaker and turn it back on again to reset the internal electronic settings. 

4.

 

Make sure the device you want to charge is not requiring more than 1.1A. 

Your BRAVEN speaker 

is optimized to charge .3A to 1.1A devices such as MP3 players and cell phones only. It will 
not charge iPads /tablets and other 2.0A devices.

 

5.

 

Discontinuing music play can provide extra charge time to external devices when the BRAVEN’s 
internal battery is low. 
 

See section 3: Charging other media devices from your BRAVEN speaker, for more information regarding 
the charging of external devices from your BRAVEN speaker. 
 
 
For additional troubleshooting and to review our Frequently Asked Questions, go 
to 

www.braven.com/support/faq

 

  
  
  

TOP

 

  
  

5. WARNINGS AND CAUTIONS 

  
To reduce the risk of fire or electric shock, do not expose the BRAVEN to rain or moisture. The BRAVEN 
should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not 
be placed on or near it. Do not use near bathtubs, washbowls, kitchen sinks, laundry tubs, in a wet 
basement, near a swimming pool, or anywhere else that water is present. As with any electronic 
products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a 
fire hazard. The power supply must be used indoors only. It is neither designed nor tested for charging 
outdoors, in recreation vehicles, or on boats. Make no modifications to the product or accessories. 
Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and 
will void the warranty. Do not place any flame sources, such as lighted candles, on or near the BRAVEN. 
The BRAVEN contains small parts that may be a choking hazard and is not suitable for children under age 
3. Before use, fully charge the battery using the supplied power adapter. Do not continue charging the 
battery if it does not reach full charge within the specified charging time. Overcharging may cause the 
battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of 
the battery. Do not attempt to charge the battery in temperatures outside the range of 32°-104°F (0°-
40°C). If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If 
contact has been made, wash the affected area with plenty of water and seek medical attention 
immediately. Do not expose the product or battery to excessive heat, including direct sunlight or fire and 
storage or use inside cars in hot weather, where it can be exposed to temperatures in excess of 115°F 
(60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the 
product in this manner also may result in a loss of performance and a shortened life expectancy. 
Extended exposure to direct sunlight may damage the external appearance and material qualities. Do not 

Содержание 6 Series












Отзывы: