Brave MXR1322B Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 50

Brave MXR1322B Скачать руководство пользователя страница 32

Brave

30

800-350-8739

Specifications

Mechanical Specifications

Slide Rail . . . . . . . . . . . . . . . . . . . . . 3 x 6 inch reinforced, heavy-duty formed channel
Wedge   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High carbon steel, compound angle
Force/Tonnage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 ton
Cylinder Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 inches
Log Opening  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 inch maximum
Cycle Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 seconds (approx.)
Operating Positions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vertical/Horizontal
Wheels & Tires  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High-Speed, 4.80 x 8”
Safety Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard
2” Hitch Coupler   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 HP Briggs & Stratton (standard)

Hydraulic Specifications

Cylinder (Clevis-Type) . . . . . . . . . . . . . . . . . . . . . . . . . 4 x 24 inch, with 1.75 inch rod

1

Hydraulic Tank Capacity   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 gallons
Hydraulic System Capacity (including cylinder, pump, and hoses)  . . . . . . . 5.4 gallons
Safety Release Control Valve  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Detent, auto return
Gear Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-stage, 11 GPM

1

Unit Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 lbs.
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440 lbs.

Hydraulic Oil Specifications (non-foaming)

Tractor Hydraulic Oil

For extremely cold weather conditions . . . . . . . . . . . . . . . . . . . SAE 10W or AW 32
For extremely warm weather conditions . . . . . . . . . . . . . . . . . . SAE 30W or AW 68

Automatic Transmission Fluid

For all weather conditions . . . . . . . . . . . . . . . . . Dexron VI, Mercon V or Equivalent

Important Notice

DO NOT mix tractor hydraulic oil with automatic transmission fluid.

Also, DO NOT mix different types of hydraulic oils and transmission fluids

(e.g., synthetic with non-synthetic). Hydraulic oil is NOT compatible with transmission

fluid, and different TYPES of hydraulic oils and transmission fluids MAY NOT BE

compatible with each other.

«
...
30
31
32
33
34
...
»

Содержание MXR1322B



















































Отзывы:

Нет отзывов