6
Before you turn on Your Phone
Make sure your mobile phone is turned off before installing the
components (SIM/UIM cards, battery, and storage card). All these
items require removing the back cover of your phone to install
them.
Installing SIM/UIM card:
Press the back cover with thumbs and slide it up, then remove the
battery.
Insert the UIM and SIM cards into the slot with the
beveled corner of the card fit the one of the slot; The contact
area of the card facing down (“1” slot insert C card, “2” slot insert
G card).
Installing the Storage Card:
To install a storage card, simply insert it into the slot. To remove
the card, push it inward with your finger. It will pop out from the
slot. Do not pull it forcefully!
Installing the Battery:
Place the battery back in the groove and make sure it’s properly
installed then attach the back cover, slide it until it clicks.
Charging the Battery:
The new battery with your phone comes partially charged, it is
recommended to charge the battery before using your mobile
phone.