Bräunlich QU376D, Руководство пользователя

Страница: 47 / 53

USER MANUAL
26
If the resistance value is not normal, replace the heating element. After
replacing heating element, please check as follow.
1. Measure the resistance value between pins 4&1 or 2, pins 5&1 or 2,
pins 6&1 or 2, pins 6&4 or 5. If it is not ∞, the heating element and
sensor are touching. This will damage the P.W.B.
2. Measure the resistance value ‘a’, ’b’, and ‘c’ to confirm that the lead
wire are not twisted and that the grounding wire is properly
connected.
3. To confirm that the clasp
⑨
is clasped with heating element
⑩
.
No. Part Name Instruction
1 Nut
2 Tip Enclosure
3 Soldering Tip Refer to the last page
4 Nip Nipple
5 Cord Cover
6 Handle Cover
7 Handle
8 Terminal Board
9 Clasp
10 Heater Combination
11 Vibrator Switch
12 Pin 6 Connector Metal
13 Sensor Spring
14 Heating Element
15 Sensor Element