Page 5
MAINTENANCE and SERVICE
3 Months
Foldout Ramp:
Foldout ramps vary in
design. Disregard references to components
not present.
Outboard ramp extension hinge and fasteners
Inspect ramp inboard pivot points (bolts/screws
and bushings/bearings) for positive securement,
wear or damage
Inspect ramp fold pickup bearing for positive
securement, alignment, wear or other damage
Inspect ramp fold arm for positive securement,
alignment, wear or other damage
Inspect ramp fold arm bearing slot for excessive
wear or damage
Inspect ramp extension chain for proper align-
ment, securement or other defects
,QVSHFWUDPSÁRRUPRXQWLQJKDUGZDUHIRUVH
-
curement (loose or missing)
General Items
Lower power slide door track
Wheelchair and occupant restraint belts and tie
down track
Inspect removable seat bases for proper en-
gagement of latching mechanisms
Clean and lubricate with *Light Oil. Resecure
or replace fasteners as needed
Clean and lubricate with *Light Oil. Tighten,
replace or correct as needed
Replace or correct as needed. If bearing
retaining screw is not secure or is removed for
service, apply Blue #242 Thread Locker Loctite
to retaining screw and tighten.
Tighten, replace or correct as needed
Replace if needed
Realign, resecure, replace or otherwise correct
as needed
Resecure, replace or correct as needed
Inspect for obstructions and clean (vacuum or
blow out debris using compressor)
Inspect for any defects such as cuts, fraying or
any malfunction of belt, buckle or securement
hardware. Clean dirt and debris from tie down
track. Replace immediately if damaged.
Replace or correct as needed
Maintenance and Lubrication Schedule
