Braun VMAX-MIPI, Руководство пользователя

Страница: 24 / 84

VMAX-MIPI User’s Manual 16 Ver 1.20
BARUN Technology
Corporation
http://www.baruntechnik.com
27 image.display
number
Display specific image number 1
28 image.first Display first image NON
29 image.next Display next image NON
30 image.prev Display previous image NON
31 image.repeat
sec
Display image repeatedly 1
32 board.power.on led Set module Back-light on(VMAX-MIPI-P2BL only) Non
33 board.power.off led Set module Back-light off(VMAX-MIPI-P2BL only) Non
34 mipi.lane.enable Lane Enable : Hi-Z -> STOP state(LP11) Non
35 spi.bridge.write Bridge chip Register write command
36 spi.bridge.read Bridge chip Register read command
37 wait Delay time 1
38 loop Repeat command from loop to loopend n times 1
39 loopend Terminate loop command Non
40 image.name.on Image file name display on Non
41 image.neme.off Image file name display off Non
42 image.name Image file name display option 5
43 beep.on Buzzer beep on Non
44 beep.off Buzzer beep off Non
45 mipi.write.var1 Send MIPI packet with variable data field set
46 var1.init Variable mipi data field initilize 3
47 var1.up Variable increase value 1
48 var1.down Variable decrease value 1
49 var1.print.on Variable mipi data display enable command Non
50 var1.print.off Variable mipi data display disable command Non
51 var1.print Variable mipi data display position 5
52 dm600.dsoc.1 dm600 Card slot#1, skew control command 7
53 dm600.dsoc.2 dm600 Card slot#2, skew control command 7
54 dm600.dsoc.3 dm600 Card slot#3, skew control command 7
55 dm600.dsoc.4 dm600 Card slot#4, skew control command 7
56 dm600.dsoc.5 dm600 Card slot#5, skew control command 7
57 dm600.dsoc.6 dm600 Card slot#6, skew control command 7
58 dm600.dsic dm600 DVI Input, reg control command 4
59 rgb.dclk rgb dot clock change command 1
60 rgb.hsync rgb vsync parameter change command 3
61 rgb.vsync rgb hsync parameter change command 3
62 var1.write Variable mipi data send the latest variable. Non