Braun Silk-epil EverSmooth 2365, Руководство пользователя

Страница: 6 / 13

7
If, after 36 hours, your skin still
shows irritations, we recommend you
contact your physician. In general,
the skin reactions and the sensation
of pain tend to diminish considerably
with the repeated use of Silk·épil.
If you have any doubts about using
this appliance, please consult your
physician. In the following cases, this
appliance should only be used after
prior consultation with a physician:
– eczema, wounds, inflamed skin
reactions such as folliculitis
(purulent hair follicles) and
varicose veins
– around moles
– reduced immunity of the skin,
e.g. diabetes mellitus, during
pregnancy, Raynaud’s disease
– haemophilia or immune
deficiency.
Silk·épil is designed to remove hair
on legs, but can also be used on all
sensitive areas like forearms, under-
arms or the bikini line.
When switched on, the appliance
must never come in contact with
the hair on your head, eyelashes,
ribbons, etc. to prevent any danger of
injury as well as to prevent blockage
or damage to the appliance.
Some useful tips
For the first use or if not having
epilated for a long time, we recom-
mend that you first shave longer
hairs. After 1–2 weeks, it is much
easier and more comfortable to
epilate the regrowing, short hairs.
Before epilating, you may as well
pre-cut long hairs to a length of 2 to
5 mm.
Hair is easier to remove after bathing
or showering. However, hair and
skin must be completely dry. After
epilating, we recommend applying
a moisture cream to relax the skin
and relieve slight skin irritations.
In the beginning, it is advisable to
epilate in the evening, so that any
possible reddening can disappear
overnight.
The fine hairs which regrow might
not manage to get through to the
skin surface. In order to prevent
in-growing hairs, we recommend
the regular use of massage sponges
(e.g. after showering) or exfoliation
peelings. By a gentle scrubbing
action, the upper skin layer is
removed and fine hairs can get
through to the skin surface.
How to epilate
• Your skin must be dry and free
from grease or cream.
• Before starting off, thoroughly
clean epilation head.
• Plug the cord connector into
the socket and plug the trans-
former plug into an electrical
outlet.
1. To turn on the appliance, slide
switch up to setting «2»
(«2» = normal epilation,
«1» = gentle epilation).
2. Rub your skin to lift short hairs.
Hold the appliance at right angles
(90°) against your skin and guide
it against the hair growth and in
the direction of the switch.
5
4
6
3
98728199_SE2365_P6-16 Seite 7 Donnerstag, 20. August 2009 11:55 11