14
Charging and cleaning the shaver
Insert the shaver head down into the cleaning
station. The contacts
u
on the back of the
shaver will align with the contacts
3
in the
cleaning station.
If required, the Clean&Renew station will auto-
matically charge the shaver. The hygiene status
of the shaver will also be analyzed and one of
the following cleaning program indicators
5
will
light up:
shaver is clean
short economical cleaning required
normal level of cleaning required
high intensive cleaning required
If the station selects one of the required cleaning
programs, it will not start unless you press the
start button
4
.
For best shaving results, we
recommend cleaning after each shave.
Pulsonic Pro Plus:
Whilst cleaning is in progress, the respective
cleaning program indicator will blink. Each
cleaning program consists of several cycles,
where cleaning fl uid is fl ushed through the
shaver head and a heat drying process dries
the shaver. Depending on the program selected
the total cleaning time will range from 32 to
43 minutes.
The cleaning programs should not be inter-
rupted. Please note that whilst the shaver is
drying, the shaving head may be hot and wet.
Pulsonic Pro:
Each cleaning program consists of several
cycles, where cleaning fl uid is fl ushed through
the shaver head. Depending on the program
selected, the cleaning time takes 3 to 15 minutes
and drying takes about 4 hours. During this time
the respective indicator blinks.
The cleaning programs should not be inter-
rupted. Please note that whilst the shaver is
drying, the shaving head may be wet.
When the program is fi nished, the blue
indicator will light up. Your shaver is now clean
and ready for use.
Stand-by mode
10 minutes after completing the charging or
cleaning session, the Clean&Renew station
switches to the stand-by mode: The indicators
of the Clean&Renew station turn off.
trimmer
Series 7
97144160_Pulsonic_S4-106.indd 14
24.11.14 13:01
CSS APPROVED Effective Date 26Nov2014 GMT - Printed 11May2015 Page 14 of 106
