background image

 

4

 

Praktical Guidelines

 

Type of Water to be Used
This iron is designed for tap water. However, if 
you have hard water we recommend to use a 
mixture of 1/2 part tap water and 1/2 part distilled 
water from drug stores or grocery stores.

Important: Never use distilled water (battery 
water). Do not add any additives (e. g. starch) to 
the water.

 

To fill iron

 

1. Pull the plug out of the wall outlet.

2. Put the steam regulator 

 

4

 

 in position «

 

 

» 

(= steam off). 

3. Open sliding shutter 

 

2

 

.

4. Place the iron in the upright position and fill 

with water slowly through the tank opening 

 

2

 

 

to the «max.» marking 

 

L

 

 (a), using the 

beaker 

 

q

 

.

5. Close sliding shutter.

 

Selecting the temperature

 

Connect the iron to a safely located wall outlet 
and select the ironing temperature with the 
temperature selector 

 

1

 

 (b). As soon as the pilot 

light 

 

8

 

 goes out, the iron has reached the 

temperature selected. To avoid water dripping, 
always rest the iron upright while heating it up 
keep the steam regulator 

 

4

 

 in position «

 

 

» 

(= steam off) (c).

You will usually find the following symbols in your 
garments:

The temperature selector 

 

1

 

 is marked with 

these symbols:

min.

The iron is connected

 

 

Synthetics (acrylic, acetate)

 

●●

 

Silk/rayon/nylon/polyester/
cotton blends/wool

 

●●●

 

Cotton/linen

max. Linen

Select the temperature you need according to 
these symbols.

 

Spray, shot of steam, jet of steam

 

Before you start ironing, we recommend to press 
the buttons 3 or 4 times, in order to activate 
these functions.

 

Dry ironing

 

Set the steam regulator 

 

4

 

 in position «

 

 

» 

(= steam off) (c) for dry ironing. The water 
spray 

 

7

 

 may be used at any temperature 

setting to dampen the laundry. The jet of steam 

 

6

 

 and the shot of steam 

 

7

 

 buttons can be 

activated during dry ironing, provided that the 
temperature selector 

 

1

 

 is within the continuous 

red area 

 

 

Steam ironing

 

(see «Table of features»)
Temperature selection: Set the temperature 
selector 

 

1

 

 within the red 

 

range steam (b) and wait 
until the iron has reached the selected 
temperature (i. e. the pilot light 

 

8

 

 goes off). 

Steam ironing is possible in the entire red range. 
Steam ironing at lower temperatures may cause 
water drops instead of steam. Should this 
happen, turn the steam regulator 

 

4

 

 to the 

position «

 

 

» (= steam off) (c).

Steam regulator 

 

4

 

Select the quantity of 
steam required (c) for 
each garment with the 
steam regulator 

 

4

 

. You 

can increase the quantity 
by turning the steam 
regulator clockwise (wide 

markings) to the end of the red marking.

Caution: While ironing do not turn the steam 
regulator further, otherwise hot water may come 
out from the sole plate (see section 
«Decalcifying/Self-cleaning»).

By turning the steam regulator anti-clockwise 
you can reduce the quantity of steam or turn the 
steam off «

 

 

» (= steam off) (see «Ironing 

Guide»).

Constant steam: Your braun steam iron ist 
equipped with a special tank configuration to 
provide constant steam even when the water 
level in the tank is low.

Extra steam* 
(coming from the 
steam vents in the sole 
plate): For stubborn 
creases and wrinkles, 
collars and cuffs. 
When ironing within 
the red range 

 

area the extra steam function can 
be used. You can press the button 

 

5

 

 (d) for 3 

seconds at intervals of no less than 15 seconds.

 

5

Jet of steam*
(coming from the outlets 

 

p

 

 at the slim pointed tip) 

 

o

 

): Caution: 

Keep children away from 
the jet of steam and do 
not hold your fingers in 
front of the outlets 

 

p

 

 

when activating this function.

When ironing within the red range 

 

area the jet of steam function 

 

6

 

 

can be used (e). To do so, press the button 

 

6

 

 at 

intervals of no less than 5 seconds. The jet of 
steam has been designed not only for steaming 
hard to reach areas like pleats, inside of pockets 
etc., but also for steaming hanging clothing (e. g. 
velvet skirts, curtains, etc.) (g). The jet of steam 
functions between horizontal and upright 
positions. Be careful not to touch sensitive 
textiles with the hot sole plate.

Shot of steam* 
(coming from the vents 
in the sole plate): 
When ironing within the 
red area 

 

the shot 
of steam function can be 
used. It gives an extra, 

particularly powerful shot of steam penetrating 
deep into the textiles in order to straighten 
creases, collars and pleats. The function «shot 
of steam» can be used in normal ironing and 
also horizontally for steaming hanging clothing 
(e. g. velvet skirts, curtains etc.) (g). Press the 
shot of steam button 

 

7

 

 at intervals of no less 

than 5 seconds. When steaming be careful not to 
touch sensitive textiles with the hot sole plate.

* If pressed too frequently, it can drip. Should this 
happen, wait a few seconds before using it 
again.

Spray (coming from the 
nozzle 

 

3

 

): The spray 

function can be used at 
any temperature, to 
dampen laundry. To do 
so, press the button 

 

7

 

 

(water spray = blue).

Spray / shot of steam 
2-function button:
With the models 2210 and 
2212 the functions «water 
spray» and «shot of 
steam» can be activated 
with a 2-function button. 
The desired function can 
be selected by turning the 
button 

 

7

 

 as far as it will 

go. The marking (blue = 
water spray or red = shot 
of steam) must point to 
the respective function (f). 
Turn the button from blue 
(spray) to red (shot of 
steam) anti-clockwise 

and from red to blue clockwise (f).

 

Storage

 

After ironing, always pull the plug out of the wall 
outlet. Set the temperature selector 

 

1

 

 to «min.» 

(b) and the steam regulator 

 

4

 

 to «

 

 

» (= steam 

off) (c).

To empty the iron hold it with the open water tank 
opening 

 

2

 

 downwards (h) and shake it 1 or 2 

times. The pivoting cord 

 

9

 

 conveniently winds 

up around the cord storage 

 

k

 

.

IMPORTANT: Store the cool steam iron in a dry 
place and always standing on its heel rest 

 

j

 

The sole plate may be damaged by remaining 
water if it is stored horizontally. The warranty 
does not cover faults or damage resulting from 
improper storage of the iron.

 

Maintenance and Cleaning

 

To remove residues of minerals/starch from the 
sole plate always use steel wool. Never use a 
scouring pad, vinegar or other chemicals. The 
steam vents 

 

m

 

 and jet of steam outlets 

 

p

 

 may 

be cleaned manually with a toothpick, if 
necessary. Clean the sole plate regularly if you 
use starch or other aids on the clothes for 
ironing.

Содержание ProGlide-jet PV 2202






Отзывы: