Braun Oral-B Genius 6000, Руководство пользователя

Страница: 8 / 40

8
Note: Store handle at room temperature for
optimal battery maintenance.
Caution:
Do not expose handle to
temperatures higher than 50°C / 122°F.
Using your toothbrush
Brushing technique
Wet brush head and apply any kind of
toothpaste. To avoid splashing, guide the brush
head to your teeth before switching on the
handle (picture
➁
). When brushing your teeth
with one of the Oral-B oscillating-rotating
brush heads
guide the brush head slowly from
tooth to tooth, spending a few seconds on each
tooth surface (picture
➂
). When using the Oral-B
«Deep Sweep» brush head
place the
toothbrush bristles against the teeth at a slight
angle towards the gumline. Apply light pressure
and start brushing in back and forth motions, just
like you would do with a manual toothbrush.
With any brush head start brushing the outsides,
then the insides and finally the chewing surfaces.
Brush all four quadrants of your mouth equally.
You may also consult your dentist or dental
hygienist about the right technique for you.
In the first days of using any electric
toothbrush, your gums may bleed slightly. In
general, bleeding should stop after a few days.
Should it persist after 2 weeks, please consult
your dentist or dental hygienist. If you have
sensitive teeth and/or gums, Oral-B
recommends using the «Sensitive» mode
(optional in combination with an Oral-B
«Sensitive» brush head).
Smart Ring features
Your toothbrush is equipped with a Smart Ring
(2) that has various functionalities indicated via
different colors of light:
White (default) = Operating and visual timer
light (choose individual color via Oral-B™ app
settings)
Red = Pressure sensor light
Blue =
Bluetooth ® pairing indicator
Timer
You can choose between «Professional» or
«2-Minute» timer.
The «2-Minute» timer signals with a long
stuttering sound and a flashing light of the
Smart Ring (2) that the professionally
recommended 2-minute brushing time has
been reached.
The «Professional» timer signals with a short
stuttering sound and a flashing light of the
Smart Ring at 30-seconds intervals to move to
the next quadrant of your mouth (picture
➂
). A
long stuttering sound and a flashing light
indicate the end of the professionally
recommended 2-minute brushing time.
The timer memorizes the elapsed brushing
time, even when the handle is briefly switched
off during brushing. The timer resets if pausing
longer than 30 seconds, briefly pressing the
mode button (4) during pause or placing the
handle on the plugged-in charger.
Note: During the use of special Oral-B™ app
features, the visual timer light may be
deactivated.
Timer setup:
Your toothbrush comes with the «Professional»
timer activated. To change this, press and hold
the mode button (4) for 2 seconds. Toggle
between timer selection by pressing the on/off
button (3). Confirm selection by pressing the
mode button.
• 2 LED’s illuminated indicate «2-Minute» timer
• 4 LED’s illuminated indicate «Professional» timer
Note: You can also set/advance the timer
functionality via Oral-B™ App.
Pressure sensor
If too much pressure is applied, the Smart Ring
(2) will light up in red, reminding you to reduce
pressure. In addition the pulsation of the brush
head will stop and the oscillation movement of
the brush head will be reduced (during «Daily
Clean», «Pro Clean» and «Sensitive» mode)
(picture
➂
).
Periodically check the operation of the pressure
sensor by pressing moderately on the brush
head during use.
Brushing modes (depending on model)
Your toothbrush offers different brushing
modes indicated on the brushing mode display
Business Use - P&G AUTHORIZED POA-00074388 Rev 001 Effective Date 2018-10-09 Printed 2019-01-23 Page 8 of 40