English
Lady Braun style
Cord socket
On/off switch
Shaving foil
Trimmers
Protective cap
Cleaning brush
Before starting off
Your Lady Braun style automatically adapts to any normal voltage
(100–240 Volts). You can use it all over the world without having to re-set
anything. When travelling abroad you may, however, need a plug adapter
to fit local sockets.
The switch
turns on both the foil shaving system and the two curved
trimmers:
On = push switch up
Off = push switch down.
Before shaving remove the protective cap
. Grasp both sides in the
middle and lift gently off. After you are finished, always put it back on
again to protect the foil against damage.
Before shaving, make sure your skin is completely dry.
Shaving
Hair removal with the combined actions of the Lady Braun style foil and
trimmer systems is fast, thorough, yet gentle to skin: The curved trimmers
first raise all long hairs and cut them off. Then the flexible foil
follows
to smooth away any stubble. For best results, hold the shaver so that
about half of the foil and one of the trimmers are in contact with your skin,
with the trimmer leading.
Guide the shaver slowly over your skin without pressing. The Lady Braun
style gives you equal shaving action on both trimmer sides, so you can
move the shaver forwards and backwards as you wish. The large,
rounded shaver head lets you easily shave those difficult curvers and
countours – on knees, ankles, underarms, bikini line, for instance.
When you are finished
After shaving, you may want to smooth on a little body cream or lotion.
Caution, however, is advised in applying perfume or deodorants right
away.
Store your Lady Braun style in its bag (pouch) when not in use. Besides
offering practical storage, it also protects the foil against possible damage
(a).
Keeping your Lady Braun style in good condition
Before cleaning, turn the shaver off. The foil of your Lady Braun style is a
precision part. To avoid damaging it, be careful when handling the shaver
head.
After every use: Remove the shaver head by pulling it off (b). Tap the
bottom (not the metal parts) on a flat surface (c). Brush out the inside of
the shaver head (d). Do not brush the shaving foil surface, because that
may damage it. Then give the top of the shaver a quick cleaning with the
brush. Replace the shaver head by clicking in place.
Do not shave with a damaged foil or cord. You may injure yourself if you
do. If damage to the foil or the cord does occur, a replacement can be
obtained via your authorised Braun dealer or a Braun Service Centre (see
appendix). Do not wind the cord around the appliance.
To maintain the high performance of your shaver, please apply some
vaseline approximately every 3 months or after each cleaning of the
shaver. Take off the shaver head and apply a tiny amount of vaseline as
indicated in illustration (e).
Subject to change without notice.
This product conforms to the EMC-Requirements as laid down by
the Council Directive 89/336/EEC and to the Low Voltage
Regulation (73/23 EEC).
Français
Lady Braun style
Prise fil
Interrupteur de mise en marche
Grille
Tondeuses
Capot de protection
Brosse de nettoyage
Lady Braun style s’adapte automatiquement à toutes les tensions les plus
répandues (100/240 Volts). Il peut être utilisé dans le monde entier sans
que rien ne soit modifié sur l’appareil.
Cependant, il est possible qu’au cours d’un voyage à l’êtranger il soit
nécessaire de recourir à un adaptateur qui permette de brancher le fil sur
une prise locale.
L’interrupteur
commande la mise en marche de la grille et des
2 tondeuses courbes:
Mise en marche : pousser l’interrupteur vers le haut.
Arrêt : pousser l’interrupteur vers le bas.
}
Tête de coup
}
Shaver head
5577068.fm Seite 5 Montag, 8. Juli 2002 8:55 08
